Description:
KRASNOKOLOR enamel for car repairing is used for the finish lacquering, bus and lorry lacquering and for weathering protection of other metal objects.

Colour tones:
different shades in color palettes.

Usage:
Before lacquering with KRASNOKOLOR the surface should be properly whetted, cleaned, degreased and dried. Pre-treatment:
1. PE 2K car repair putty
2. Primer
3. Car repair putty for spattering or foundation lacquer

During single coating the surface should be wetly whetted with sand paper of granulation 360-400, cleaned and dried. KRASNOKOLOR car enamel should be well mixed and diluted with 10-20 of AVTOEMAJL (CAR ENAMEL) DILUENT up to viscosity 20-25 (F-4mm DIN-53211 T-20°C). The enamel is applied by spattering with air pistol, crosswise (twice). Dry film thickness should be cca 40 µm. Application through nozzle 1-1,2m, air pressure 3-5 bars.
Temperature 20°C
-dry dust free 60 minutes
-dry tack free 6 hours
-for the assembly 24 hours

Temperature 60°
-exhaust cooling 15 minutes
-drying 60 minutes
-after the cooling for the assembly

Temperature 80°C
-exhaust cooling 15 minutes
-drying 45 minutes
-after the cooling for the assembly