Description:
STREET PAINT designed in white and yellow. It is used for street marking, for parking lots…It is applied by spattering. It has a good adhesive strength on asphalt, stone and concrete. The painted surface has a good light reflection. The applied paint dries quickly. After 25 minutes it is possible to drive without damaging the street. It excels in flexibility, in resistance from weather influence, water, and light, ageing and wearing out. Traffic safety is possible for at least 12 months. The paint can be used very successfully for marking playgrounds, for painting façades and sanitation of walls on very exposed places.

Colour tones:
white and yellow, any shade when ordering over 600kg.

Usage:
Before painting, the surface must be cleaned from dust, oil, organic and inorganic dirtiness. It can be manipulated by spattering, with brush or roller. Less than 250µm wet film thickness can not be applied. On much burdened surfaces it is recommended to apply 400-600µm of the wet film thickness. On the painted surface we can add reflex pearls (pearl thickness 125-500µm). Theoretical application rate is cca 370g/m2 for 250µm. The pearl application must follow right after the painting, after 5 seconds (not later), because of the adhesive strength. Drying time of the wet film thickness (250µm) is 15-25 minutes at 20°C. It can be diluted with STREET PAINT DILUENT. We clean the tools with the same diluent.